Nilfisk-ALTO 20 - Manual (Page 26)

8
CENTIX 60
CENTIX 60 PREMIUM
english
As required
7.2.1 Emptying dirt tank z
7.2.2 Replacing the filter bag z
7.2.3 Replacing the filter element z
7.2.4 Check that the hose of the level indicator and
accessories are not blocked and clean them. z
7 Maintenance
7.1 Maintenance plan
7.2 Maintenance work
7.2.1 Emptying dirt tank
Empty the dirt tank if you use
the vacuum cleaner without a
filter bag:
1. Remove the upper section of
cleaner from the dirt tank.
2. Using one hand, take hold of
the dirt tank underneath and
tip out the dirt.
3. Dispose of the dirt in accor-
dance with legal regulations.
4. Clean the rim of the tank.
5. Attach the upper section of
the cleaner.
6. Clean the inlet fitting and
hose collar.
7. Re-insert the suction hose.
7.2.2 Replacing the filter bag 1. Remove the upper section of
cleaner from the dirt tank.
2. Carefully remove the filter
bag connection from the inlet
fitting.
3. Close the filter bag connec-
tion with the slide.
4. Dispose of the filter bag in
accordance with legal regu-
lations.
5. Place a new filter bag into the
cleaned tank as described in
the instructions (printed on
the filter bag).
IMPORTANT:
Press the filter bag connection
firmly on to the inlet fitting.