Nilfisk-ALTO 20 - Manual (Page 23)

5
CENTIX 60
CENTIX 60 PREMIUM
english
®
2
1
302 001 193 / 302 001 194
3.3 Fitting suction hose
and waste air hose 1. Suction hose, 1 m:
Screw 90° bush (1) on to one
end of the suction hose (left
thread).
2. Waste air hose, 1 m:
Screw rotatable bush ø50 mm
(2) on to one end of the suc-
tion hose.
3. Connect the hoses to the
cleaner and the system as
shown in the diagram.
4 Operation
4.1 Connections
4.1.1 Electrical connection The operating voltage shown on
the rating plate must correspond
to the voltage of the mains po-
wer supply. 1. Ensure that the vacuum
cleaner is switched off.
2. Insert the power cord into a
properly installed and fused
socket with an earthing con-
tact.
4.1.2 Connection diagram
for central extraction
system