Upgrading your software and firmware, Additional care and maintenance – Kodak Z612 User Manual
Page 77
Appendix
www.kodak.com/go/support
71
Visit
for:
Kodak EasyShare camera dock—powers your camera, transfers pictures to your
computer, and charges the Kodak Li-Ion rechargeable digital battery KLIC-8000.
Kodak EasyShare printer dock—powers your camera, makes
4 x 6 in. (10 x 15 cm) prints with or without a computer, transfers pictures, and
charges the Kodak Li-Ion rechargeable digital battery KLIC-8000.
Kodak 3-volt AC adapter—powers your camera.
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare camera dock
or printer dock to power your camera. Your camera may use a different
AC adapter.
Upgrading your software and firmware
Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera). See
Additional care and maintenance
■
If the camera has been subjected to inclement weather or you suspect water has
gotten inside the camera, turn off the camera and remove the batteries and card.
Allow all components to air-dry for at least 24 hours before using the camera
again.
■
Blow gently on the lens or camera screen to remove dust and dirt. Wipe gently
with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning
solutions unless designed specifically for camera lenses. Do not allow chemicals,
such as suntan lotion, to contact painted surfaces.
■
Service agreements are available in some countries. Contact a dealer of Kodak
products for more information.
■
For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at
or the
Kodak Web site at
.