Kodak Z612 - Manual (Page 31)

Doing more with your camera
www.kodak.com/go/support 25
Changing the flash settings
NOTE: Flash settings are pre-set for each picture-taking mode. Some of the flash settings may not be
available in all Capture or Scene modes. When you change to Auto or Red-eye in some of these
modes, it becomes the default until you change it.
Flash-icon behavior
Flash modes Flash fires
Auto
Flash When the lighting conditions require it.
Fill Every time you take a picture, regardless of the lighting conditions. Use
when the subject is in shadow or is “backlit” (when the light is behind
the subject). In low light, hold the camera steady or use a tripod.
Red-eye The flash fires once so the eyes become accustomed to the flash, then
fires again when the picture is taken.
Off Never.
The active icon is displayed
in the EVF/LCD screen.
Press the Flash button repeatedly
to scroll through the flash modes
and to select a mode.
blinks, the flash is charging. When
Take a picture when the icon stops blinking.