Kodak CX6200 - Manual (Page 65)

53
Chapter 6
Turning On Liveview in Auto Mode
The Liveview feature lets you use the camera screen as a viewfinder (see
page 18 ). The default setting is Liveview Off. Press the OK button to turn it on.
IMPORTANT: Liveview significantly reduces battery life.
To change the Liveview default to On:
1 Press the Menu button.
2 Press to highlight Setup Menu , then press the OK button.
3 Highlight the Liveview icon , then press the OK button.
4 Highlight On, then press the OK button.
Liveview is now On by default. The
camera screen is on whenever the camera
is on (in Auto or Video mode). You can
still press the OK button to turn Liveview
off and on.
5 Press the Menu button to exit the menu.
This setting remains until you change it.
Setting Video Out
Video Out is a regional setting that lets you connect your camera to a television
or other external device using an optional Kodak EasyShare printer dock 6000
and an audio/video cable (see
page 43 ).
1 Press the Menu button.
2 Press to highlight Setup Menu , then press the OK button.
3 Highlight the Video Out icon , then press the OK button.