Kodak HERO 3.1 - Manual (Page 2)

2 www.kodak.com/go/aiosupport
Setting up a wireless connection
Before you connect, you need:
■ a wireless router.
■ to determine whether your wireless router supports Wi-Fi Protected Setup (WPS).
NOTE: If you have specific questions about your router, see your router manufacturer’s
documentation.
Connecting to a wireless router (non-WPS)
Record your network information in the spaces below, using uppercase and lowercase
letters.
Network Name (SSID): ______________________________________________
Security String (case-sensitive): ________________________________________
NOTE: If you already set up your printer, you need to press Home, then press to
select Network Settings, then Wi-Fi Setup Wizard. Press OK after each
selection.
1 Press to select Wireless, then press OK.