Connecting to a wps wireless router – Kodak ESP 7250 User Manual
Page 3
www.kodak.com/go/inkjetnetworking
3
Networking Setup Guide for KODAK All-in-One Printers
There are two types of keyboards. Follow the instructions for your keyboard.
4. When the confirmation message appears, press
OK.
When the printer is successfully connected, the Wi-Fi status light is on.
If you are unable to connect your printer, go to
www.kodak.com/go/inkjetnetworking
.
5. Install the KODAK All-in-One Printer Software on your computer. Follow the on-screen instructions
to complete your setup.
NOTE: If you installed the software before connecting to your network, select
Start > Programs >
Kodak > Kodak Printer Network Setup Utility and follow the on-screen instructions.
Connecting to a WPS wireless router
NOTE: If you already set up your printer, you need to press
Home, then press
to select
Network
Settings, then WiFi Setup Wizard. Press OK after each selection.
1. Press
to select
Wireless, then press OK.
•
To change from uppercase to
lowercase, select
abc/123,
then press
OK.
• To change from lowercase to
uppercase, select
ABC/123,
then press
OK.
•
To enter punctuation or
symbols, select
!@#, then press
OK.
Use the arrow
keys to select the
letters, numbers,
and symbols.
Press
OK
after
each selection.