Asus AP130-D5 - Manual (Page 26)

26 Chapter 2: Hardware Setup
2.4 Install System Memory
The motherboard has two Dual
Inline Memory Module (DIMM)
sockets that support up to 2GB
system memory using PC2100/
PC1600 DDR DIMMs.
Install a DIMM
1. Unlock a DIMM socket by
pressing the retaining clips
outward. Align a DIMM on the
socket such that the notch on
the DIMM matches the break
on the socket.
2. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the
DIMM is properly seated.
DIMM Sockets Location
A DDR DIMM is keyed with a notch so it fits in only one direction.
DO NOT force a DIMM into a socket to avoid damaging the DIMM.
CAUTION
Socket break
DIMM notch
DDR DIMM sockets