Kodak 9810 - Manual (Page 41)

Using the Diagnostic Tool
5-3
5. Place the two prints together and note the number closest to the
following occurrences:
• Cutter offset: the point at which the cut intersects the horizontal line
• Page offset: the point at which the right side of the page intersects the
vertical line
6. Enter the Cutter offset and Page offset values. Click Update.
7. Click Print to print another test page and verify the settings.
8. Repeat Steps 2 - 7 , if necessary.
NOTE: Ideally the cutter offset and the page offset should be at zero.
Cutter offset Page offset