Mobile Video HDD HV356T - Manual (Page 28)

Setup Menu
24
DVD MENU
Select the language for the default menu when playing a DVD movie.
AUDIO SETUP
This sub-menu can only be set when the
unit stops playback.
DOWNMIX
Set this function when output audio
signal via the Composite connectors:
LT/RT : Outputs the left or right
channel to both channels.
Stereo : Outputs stereo audio.
SPDIF OUTPUT
Outputs the digital audio signal via the Coaxial connector. After enabling this function, the
Composite connector will not output the audio signal.
OFF : Outputs audio via Composite, and disables the digital audio output.
SPDIF/RAW : Outputs the digital audio without decoding. See “PRO LOGIC.”
SPDIF/PCM : Converts the multi-channel audio signal into stereo for output. See
“LPCM OUTPUT.”
PRO LOGIC
This function only works if you have selected “SPDIF/RAW”.
If the movie contains PCM stereo sound, after enabling this function and connected to an
AV amplifier (receiver) equipped with a digital audio decoder, the audio output will be
simulated as multi-channel sound.
OFF : No multi channels simulation.
ON : Outputs audio signal with multi channels simulation.
AUTO : Outputs audio signal with multi channels simulation whenever possible.
LPCM OUTPUT
This function only works if you have selected “SPDIF/PCM”.
LPCM stands for Linear Pulse Code Modulation, which is a common method for
encoding audio signal in CD and DVD. Higher sampling rate means audio output with
more detail to meet Hi-end audiophile equipment requirements.