Pfw6850 – Vogels PFW6850 User Manual

Page 4

www.vogels.com

9531-006-Z00-02

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

PFW6850

Place the display face down on a smooth flat surface. Place
the left and right mounting brackets over the four mounting
points on the rear of the display arrow pointing up to the top
of the display, making sure the brackets are lined up with the
center top to bottom on the display.

Take the plastic depth straw supplied and confirm the overall
“safe” screw depth that can be used.

Re-install the front wall arm plate to the arm with the three
M5 flat head screws you set aside earlier. Confirm screws
are fully seated and tight.

Raise the PFW6850 assembly so the mounting slots are
over the four drilled mounting holes. Confirm mount level
with spirit level and secure the mount to the wall surface
with the four each 5/16 x 3” lag bolt and 5/16” flat washer
supplied.
Re-confirm secured assembly is level horizontally and verti-
cally or level again if necessary before proceeding.
NOTE: Do not over tighten lag bolts

1/2”