Vogels PFW 6831 User Manual
Page 2
Page 2
Installation Instructions
Table of Contents
VOGEL’S
DOES
NOT
WARRANT
AGAINST DAMAGE CAUSED
BY
THE
USE
OF
ANY
VOGEL’S PRODUCT
FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED
ATTACH-
MENTS OR MODIFICATIONS,
AND IS NOT RESPONSIBLE
FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR
CAUSES OF ACTION OF WHATEVER
KIND RESULTING
FROM, ARISING OUT OF OR IN ANY MANNER RELATING
TO ANY
SUCH USE, ATTACHMENTS OR MODIFICATIONS.
THE WALL STRUCTURE
MUST BE CAPABLE OF SUPPORTING
907 KG IF NOT, THE WALL STRUCTURE
MUST BE
REINFORCED.
PROPER INSTALLATION
PROCEDURE
BY A QUALIFIED
SERVICE
TECHNICIAN,
AS OUTLINED IN THE
INSTALLATION
INSTRUCTIONS,
MUST BE ADHERED TO. FAILURE
TO DO SO COULD RESULT IN SERIOUS PERSONAL
INJURY, OR EVEN DEATH.
SAFETY MEASURES
MUST BE PRACTICED
AT ALL TIMES DURING THE INSTALLATION
OF THIS PRODUCT. USE PROPER
SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY.
Warning Statements
Indicates that the power plug is to be disconnected
from the power outlet.
Safety precautions must be taken at all times.
Warning and Caution statements.
In the interest of safety, it is recommended that two to three people, with the aid of an appropriate assisted lifting device,
perform this
Warning Statements
2
Parts List
3
Recommended Installation Tools
3
Features
4
Installation Instructions
4
8
PRIOR TO THE INSTALLATION
OF THIS PRODUCT, THE INSTALLATION
INSTRUCTIONS
SHOULD BE READ AND
COMPLETELY
UNDERSTOOD.
THE INSTALLATION
INSTRUCTIONS
MUST BE READ TO PREVENT
PERSONAL INJURY AND
PROPERTY
DAMAGE. KEEP THESE INSTALLATION
INSTRUCTIONS
IN AN EASILY ACCESSIBLE
LOCATION FOR FUTURE
REFERENCE.
It is recommended that a maximum of 5/8” thick plaster board be used, along with 5/16” lag bolts and washers, when mountin
g to wooden
studs.
PFW 6831
THIS MOUNT IS NOT RECOMMENDED FOR USE
WITH STEEL STUD WALL STRUCTURES THAT
ARE LESS THAN 10 GAUGE IN THICKNESS ON
THE PROPOSED INSTALLATION WALL.
INSTALL THE DISPLAY ACCORDING
TO THE INSTRUCTIONS
PROVIDED BY THE DISPLAY MANUFACTURER.
PERFORM ALL STRUCTURAL
REINFORCEMENTS
BEFORE ATTACHING
THE DISPLAY TO THE WALL. USE
THE APPROPRIATE LIFTING DEVICE WHEN LIFTING THE DISPLAY INTO PLACE.