TotalPond A16549 User Manual
Page 6

6
CARE AND MAINTENANCE
•
Regular cleaning of the aerator may be necessary depending upon the environment in which it is
operated. Clean the aerator when it is visibly soiled or when a drop in performance is detected.
•
Before cleaning, always disconnect the aerator from the power source.
•
Remove all parts from the aerator and clean in warm, soapy water.
•
Disassemble the pump cover and remove the impeller cover to expose the impeller assembly. Use
a soft cloth or brush to clean the impeller assembly and the inside of the impeller housing. Refer to
the diagram in the replacement parts list.
•
Regular cleaning of the aerator housing may be necessary depending upon the environment in
which it is operated. Clean the aerator housing when it is visibly soiled or when a drop in
performance is detected.
TROUBLESHOOTING
If the LED lights fail to operate:
•
Check to make sure the power cord is plugged in and the light is getting power and the unit is
getting power.
If the pump fails to operate:
•
Check to make sure the power cord is plugged in, the pump is getting power and the pump is
fully submerged.
•
Remove the inlet screen and/or pump cover, and impeller cover to expose the impeller. Turn
the impeller to ensure that it is not broken or jammed.
If the performance of the aerator is not satisfactory:
•
Check to make sure the aerator is completely submerged in water.
•
Check the air hose for any water, kinks or obstructions.
•
Adjust the air valve.
•
Check to make sure the aerator, air valve, filter pad and the housing are clean and clear of
debris.
•
Check the pump outlet, for kinks or obstructions.
•
Check to make sure the impeller and the housing are clean.
•
Adjust flow control.