TotalPond A16549 User Manual
Page 4

4
DISASSEMBLY PROCEDURE
In order to insure optimal operation of the aerator, the following procedures should be performed
periodically. When the performance of the aerator is reduced – it is an indication that cleaning of the
unit is needed.
1. Unplug the power cord, and then carefully remove the aerator
assembly from the pond. Fig. 7
Fig. 7
2. Remove the cover by turning counterclockwise and lifting it from the
base. Fig. 8
Fig. 8
3. Carefully remove the filter pad. Rinse it with water to clean any
debris off the surface. Fig. 9
Fig. 9