Silent Call SK09214-2 - Manual (Page 6)

6 7
6. To turn the ALARM on or off, press and release the “Alarm Clock” button. When the alarm is
turned ON the BELL ICON will appear on the screen.
LCD Display:
The LCD Display screen is back lighted. The back light brightness is automatically controlled by the
light level in the room. When the room becomes dark, the back lighting comes on. When the room
becomes light, the back lighting goes off.
telephone Direct Interface:
The Sidekick II Receiver has the ability to plug a standard telephone line directly into the receiver
and it will notify you each time the telephone rings. (See Diagram Below)
Plug the supplied dual connector into your phone jack wall outlet. Then plug the wire from your
telephone into one side of the dual connector. Next, take the telephone wire that came with your
Sidekick II Receiver and plug it into the other side of the dual connector (See illustration #1.)
Finally, plug the other end of that cable into the back of the Sidekick II Receiver (See illustration
#2.)
The receiver will notify you in the same way as if you were using a Telephone Transmitter (see sec-
tion on Notifications, pg 7).
Illustration #1
Illustration #2