Mechanical, Ac-6 – Sheffer LA SERIES User Manual
Page 7
Cylinder Dimensions
For complete cylinder dimensions, please consult the
appropriate cylinder brochure.
A SERIES –
Pneumatic cylinders rated for pressures up to 250
psi. Steel, square head, ANSI interchangeable design.
MH SERIES –
Hydraulic cylinders for medium service with
pressures up to 2,000 psi, depending on bore size.
HH SERIES –
Hydraulic cylinders rated for 3,000 psi operating
pressure.
HH SERIES
ROD
HEAD
CAP
BORE
DIA.
A
C
B
C
5
/
8
5
/
8
1
/
2
5
/
8
1
/
2
1
5
/
8
1
/
2
5
/
8
1
/
2
1
5
/
8
1
/
2
3
/
4
1
/
2
1
3
/
8
5
/
8
5
/
8
3
/
4
1
/
2
1
5
/
8
1
/
2
3
/
4
—
1
3
/
8
5
/
8
1
/
2
3
/
4
—
1
3
/
4
5
/
8
5
/
8
3
/
4
—
1
3
/
8
3
/
4
—
3
/
4
—
1
3
/
4
3
/
4
1
/
2
3
/
4
—
2
3
/
4
1
/
2
3
/
4
—
1
3
/
4
3
/
4
—
3
/
4
—
2
3
/
4
—
3
/
4
—
2
1
/
2
3
/
4
1
/
2
3
/
4
—
2
3
/
4
—
3
/
4
—
2
1
/
2
3
/
4
—
3
/
4
—
3
5
/
8
—
3
/
4
—
3
1
/
2
3
/
4
—
3
/
4
—
2
1
/
2
1
—
1
—
3
1
—
1
—
3
1
/
2
1
—
1
—
4
1
—
1
—
3
1
—
1
—
3
1
/
2
1
—
1
—
4
1
—
1
—
4
1
/
2
1
—
1
—
5
1
—
1
—
3
1
/
2
1
—
1
—
4
1
—
1
—
4
1
/
2
1
—
1
—
5
1
—
1
—
5
1
/
2
1
—
1
—
Always check dimensions for possible interference.
Switch Adjustment
Switches are pre-set at the factory when assembled to the
cylinder. They can, however, be field adjusted in the
following manner:
Disconnect all electrical supply circuits.
Remove limit switch box cover.
If adjusting the switch on the head end of the cylinder
(the end of the cylinder with the piston rod), retract the
rod fully.
If adjusting the switch on the cap end of the cylinder,
extend the piston rod fully.
Turn the hex head adjusting screw (see illustration)
counter-clockwise until the limit switch clicks on. After
the switch has clicked on, turn the hex head adjusting
screw clockwise until the switch clicks off, then continue
to turn clockwise an additional 1/4 turn.
Replace the limit switch box cover.
Reconnect the electrical supply circuits.
5
/
16
HEX HEAD
ADJUSTING SCREW
SWITCH ADJUSTMENT
8
7
6
5
4
3
1
/
4
2
1
/
2
2
1
1
/
2
LIMIT SWITCH ACTUATORS - DIMENSIONS
Mechanical
AC-6