Seiwa SW RP07 - Manual (Page 5)

average speed. Pressing the
key again while displaying the
distance traveled log will toggle the display between total
distance traveled and trip distance traveled. The trip log displays
with a decimal point such as "82.3" and the permanent log
displays to a full digit such as "562" so you always know which
log you are viewing.
Display Average Speed
Press the
key for a second time to display the average speed
An “A” will be displayed above the speed to indicate Average
Speed display. The damping used to compute the average speed
is adjustable and can be set between 1 and 20.
Display Trip Log
Press the
key for a second time to display the trip log. The
trip log displays with a decimal point such as "82.3" and the
permanent log displays to a full digit such as "562" so you always
know which log you are viewing. Each time you press the
key the display will toggle between Permanent Log and Trip
Log.
Display Elapsed Time
Press the
key for 1/2 second to display the elapsed time since
the instrument was turned on. When the elapsed time exceeds
60 minutes, the elapsed time clock displays hours and minutes
in place of minutes and seconds and the semi-colon flashes.
Resetting the Trip Log/Elapsed Time Clock
While viewing the Trip Log, press and hold the
key for 10
seconds (till you hear a long beep) to reset both the trip log and
elapsed time clock to zero.
Display/Start/Setting the Race Timer
The race timer can be started with one of two different values
between 1 and 99 minutes (factory preset to 5 and 10 minutes).
To start the timer with the first value, press both the
and
keys. The display will start counting down from 5:00, beeping
at each minute and for each of the last ten seconds. To start the
timer with the second (10 minute) value, press both the
and
keys simultaneously.
If the timer was already running, the current value is displayed.
To stop and preset the timer, press the appropriate key
combination (
and or the and keys). To restart the timer,
press the appropriate key combination again.
The race timer start times are factory preset to start at either 5
or 10 minutes. To change the first start value, press and hold