Prevue Pet 441 - Manual

Model #429, #430, #440, #441 Cage Stand Assembly Instructions
1. Assemble both left and right frames (B) to frame A (make sure the small hole at the bottom faces inward) with
supplied screws and nuts (C and D).
2. Insert mesh E into the hole, and assemble frame A on the other side.
3. Make sure all the screws and nuts are tight for secure.
Parts:
A Frame x 2, B Frame x 2, C and D - Screw and nut sets x 8, Mesh E x 1
*** WARNING : For safety, not to exceed 100 lbs. maximum load weight. ***
Prevue Pet Products, Inc.
224 N. Maplewood Ave., Chicago, IL. 60612 Phone: (312) 243-3624 Toll free: (800) 243-3624
http://www.prevuepet.com or email us at [email protected]