Prevue Pet 131 - Manual

A
B
C
D + E
F
ASSEMBLY INSTRUCTIONS
A) Attach black steel “ Base Frame” to the 2 steel tubing “U’s”, placing the acorn nuts on the
outside of the stand in 4 places.
B) Attach 2 long support tubes lengthwise across bottom of stand, front & back, placing the
acorn nuts towards the outside.
C) Attach 2 short support tubes on the far right & left sides of the stand, placing the acorn
nuts on the outside of the assembly.
D) Insert white plastic tubing inserts into open ends of tubing at bottom of “U’s”. Please be
sure that the inserts are forced completely into tubes, use hammer if necessary.
E) Insert steel caster stems into plastic inserts. You will feel a slight “pop” when the caster is
in the correct position.
F) Space on the bottom of stand will accept an additional #131 cage if desired.
G) Install feeding cups & perches in the interior of cage.
Prevue Pet Products, Inc. #131
224 N. Maplewood Ave. Chicago, IL. 60612 (800) 243-3624