Prevue Pet 245 - Manual

Roof section
Stand curl alignment
Stand basket
Stand shelves
Congratulations on your purchase of the Model 245 Cockatiel Cage. Please check the following
contents prior to assembly.
1 Roof
1 tray basket for stand
4 tubular legs for stand 1 grille floor
2 stand shelves 1 cage tray
8 sets screws with nuts 2 support bars
3 black plastic levelers 4 cage body pieces
4 seed guard pieces 2 cups, 1 wood perch
Should you find that you are missing any of the above pieces, please contact our customer
service directly at 800-243-3624 and the part will be promptly sent.
Step 1 – the cage stand
Attach 1 leg to bottom shelve with screws & nuts, with the nut to the inside. Attach all 4 legs to
the shelf with the curls of the tubular stand to the outside on the top portion, and the holes in the
tubing are on the topside (to attach the stand basket).
Attach the legs to the top shelf with the remaining screws and nuts. Tighten all bolts.
Insert the black plastic levelers into the bottom of the cage stand.
Insert the cage basket by inserting the pins in the basket bottom into the holes in the top of the
cage stand. This will have a snug fit.
Assembly Instructions
Prevue Pet Products, Inc
Model # 245