MyWeigh MBSC ULTRA - Manual (Page 2)

4) Remove the baby or item from the scale platform. The item’s weight reading will remain on the
display for 120 seconds.
5) End the hold function: Once an item is weighed and the hold function is enabled; you may want to
end the hold function, Press the hold key again to cancel the “.” hold indicator and return the scale
normal mode.
AUTO–OFF FUNCTION SETTINGS
To enable or disable the auto-off feature follow these directions:
1. Start with the power off (the power must be OFF). Press and hold the [Hold]
key first, then press [ON/OFF], then release both keys. The display will show
A_ON or A_OFF.
2.Selection of auto shut off mode.
Press the [Hold] key, the display will show A_ON or A_OFF. A_ON means the auto shut off function is
active. Press [Hold] again, the display will show A_OFF, this means the auto shut off function is inactive.
3.Return to weighing mode.
Press [ON/OFF] to turn the power off, press [ON/OFF] again to turn on the power and the scale will
return to weighing mode.
WEIGHING
Before weighing
Whenever possible, please allow the scale to warm up for several seconds after first turning the power
on so that the scale will function properly and accurately.
Error messages
EEEE: Overload : Low battery