Serial ata ii connector: sata1 ~ sata4, Important, Chassis intrusion connector: jcase1 – MSI MS-9A08 User Manual
Page 41
3-9
MS-9A08
Serial ATA II Connector: SATA1 ~ SATA4
This connector is a high-speed Serial ATA II interface port. Each connector can con-
nect to one Serial ATA II device.
SATA1
SATA2
SATA3
SATA4
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss
may occur during transmission.
Chassis Intrusion Connector: JCASE1
This connector is provided to connect the chassis intrusion switch cable. If the chas-
sis is opened, the chassis intrusion mechanism will be activated. The system will
record this status and show a warning message on the screen. To clear the warn-
ing, you must enter the BIOS utility and clear the record.
JCASE1
CINTRU
GND