MSI MS-9A08 - Manual (Page 40)

3-8
MAINBOARD SETUP
▍
c
OnnectOrs
Fan Power Connector: CPUFAN1, SYSFAN1
The fan power connectors support system cooling fan with +12V. When connecting
the wire to the connectors, always note that the red wire is the positive and should
be connected to the +12V; the black wire is Ground and should be connected to
GND. If the mainboard has a System Hardware Monitor chipset onboard, you must
use a specially designed fan with speed sensor to take advantage of the CPU fan
control.
Important
Please refer to the recommended CPU fans at processor’s official website or
consult the vendors for proper CPU cooling fan.
Fan cooler set with 3- or 4-pin power connector are both available for CPU-
FAN1.
•
•
SYSFAN1
SENSOR
+12V
GND
CPUFAN1
SENSOR
+12V
GND
CONTROL