Serial ata connector: sata1 ~ sata4, Chassis intrusion connector: jcase1 – MSI IM-GS45-D User Manual

Page 28

2-8

HARDWARE SETUP

▍

Serial ATA Connector: SATA1 ~ SATA4

This connector is a high-speed Serial ATA interface port. Each connector

can connect to one Serial ATA device.

SATA4

SATA3

SATA2

SATA1

Important

Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,

data loss may occur during transmission.

Chassis Intrusion Connector: JCASE1

This connector is provided to connect the chassis intrusion switch cable. If

the chassis is opened, the chassis intrusion mechanism will be activated.

The system will record this status and show a warning message on the

screen. To clear the warning, you must enter the BIOS utility and clear the

record.

CINTRU

GND