beautypg.com

Jumper, Jumper -17, Lvds power jumper: j1 – MSI IM-GS45-M User Manual

Page 31: Clear cmos jumper: jbat1

background image

2-17

MS-9871

J

uMper

LVDS Power Jumper: J1

Use this jumper to specify the LVDS power.

J1

1

+3V

1

+5V

1

+12V

1

Clear CMOS Jumper: JBAT1

There is a CMOS RAM on board with an external battery power supply to

preserve the system configuration data. With the CMOS RAM, the system

can automatically boot OS every time it is turned on. If you want to clear the

system configuration, set the jumper to clear data.

Important

You can clear CMOS by shorting 2-3 pin while the system is off. Then return

to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will

damage the mainboard.

Keep Data

1

1

JBAT1

1

Clear Data

See also other documents in the category MSI Hardware: