MSI IB-945GC - Manual (Page 17)

2-5
MS-9868
CPU & Cooler Installation
When installing the CPU, make sure the CPU has a cooler attached on the top
to prevent overheating. Meanwhile, do not forget to apply some thermal paste
on CPU before installing the heat sink/cooler fan for better heat dispersion.
Follow the steps below to install the CPU & cooler correctly. Wrong installation
will cause damage to your CPU & mainboard.
The CPU socket has a plastic
cap on it to protect the contact
from damage. Before you install
the CPU, always cover it to pro-
tect the socket pin.
1. Remove the cap from lever hinge
side.
2.
The pins of socket reveal. 3. Open the load lever. 4.
Important
Confirm if your CPU cooler is firmly installed before turning on your system.
Do not touch the CPU socket pins to avoid damage.
The availability of the CPU land side cover depends on your CPU package. •
•
•