Aspire Digital 8930 - Manual (Page 44)

38 Chapter 2
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
Parameter Description Format/Option
System Time Sets the system time. The hours are
displayed with 24-hour format. Format: HH:MM:SS
(hour:minute:second)
System Time
System Date Sets the system date. Format MM/DD/YYYY
(month/day/year)
System Date
System Memory This field reports the memory size of the
system. Memory size is fixed to 640MB
Extended Memory This field reports the memory size of the
extended memory in the system.
Extended Memory size=Total memory
size-1MB
VGA Memory Shows the VGA memory size. VGA
Memory size=64/128MB
Quiet Boot Determines if Customer Logo will be
displayed or not; shows Summary Screen
is disabled or enabled.
Enabled: Customer Logo is displayed, and
Summary Screen is disabled.
Disabled: Customer Logo is not displayed,
and Summary Screen is enabled. Option: Enabled or
Disabled
Power on display Auto: During power process, the system
will detect if any display device is
connected on external video port. If any
external display device is connected, the
power on display will be in CRT (or
projector) only mode. Otherwise it will be in
LCD only mode.
Both: Simultaneously enable both the
integrated LCD screen and the system’s
external video port (for an external CRT or
projector). Option: Auto or Both
Network Boot Enables, disables the system boot from
LAN (remote server). Option: Enabled or
Disabled
F12 Boot Menu Enables, disables Boot Menu during
POST. Option: Disabled or
Enabled
D2D Recovery Enables, disables D2D Recovery function.
The function allows the user to create a
hidden partition on hard disc drive to store
operation system and restore the system
to factory defaults. Option: Enabled or
Disabled