MSI MS-96C8 Series - Manual (Page 22)

2-8
MS-96C8 Server Board
Power Supply
PIN SIGNAL
13 +3.3V
14 -12V
15 GND
16 PS-ON#
17 GND
18 GND
19 GND
20 NC
21 +5V
22 +5V
23 +5V
24 GND
PIN SIGNAL
1 +3.3V
2 +3.3V
3 GND
4 +5V
5 GND
6 +5V
7 GND
8 PW R OK
9 +5VSB
10 +12V
11 +12V
12 +3.3V
JPWR2 Pin Definition
Important
1. Make sure that all power connectors are connected to the power supply to
ensure stable operation of the mainboard.
2. Power supply of 600 watts (and above) is highly recommended for system
stability.
System Power Connector: JPWR2
This connector allows you to connect a power supply. To connect the power supply,
make sure the plug of the power supply is inserted in the proper orientation and the
pins are aligned. Then push down the power supply firmly into the connector.
CPU/Memory Power Connector: JPWR1, JPWR3
These connectors provide 12V power output to the CPUs & memory.
PIN SIGNAL
5 +12V
6 +12V
7 +12V
8 +12V
PIN SIGNAL
1 GND
2 GND
3 GND
4 GND
JPWR1 Pin Definition
JPWR2
12 1
24 13
JPWR1
1
8 5
4
PIN SIGNAL
5 +12V
6 +12V
7 +12V
8 +12V
PIN SIGNAL
1 GND
2 GND
3 GND
4 GND
JPWR3 Pin Definition
JPWR3
1
8 5
4
PDF created with pdfFactory Pro trial version www.pdffactory.com