MSI Z68A-GD55 (G3) - Manual (Page 19)

2-3
MS-7681
Chapter 2
Screw Holes
When you nstall the manboard, you have to place the manboard nto the chasss n the
correct drecton. The locatons of screws holes on the manboard are shown as below.
Refer above pcture to nstall standoffs n the approprate locatons on chasss and then
screw through the manboard screw holes nto the standoffs.
Important
To prevent damage to the manboard, any contact between the manboard crcut and
chasss or unnecessary standoffs mounted on the chasss s prohbted.
Please make sure there are no metal components placed on the manboard or wthn
the chasss that may cause short crcut of the manboard.
•
•
Screw holes
The sde has to
toward the rear,
the poston for
the I/O sheld of
the chasss.