MSI Z68A-GD80 (B3) Manual - Manual (Page 27)

2-11
MS-7672
Chapter 2
Back Panel
LAN
IEEE 1394 Port
Keyboard/ Mouse
Optcal
S/PDIF-Out
Lne-In
Lne-Out
Mc
HDMI Port
RS-Out
CS-Out
SS-Out
USB 2.0 Port
USB 2.0 Port
USB 3.0 Port
Clear CMOS button
Optcal S/PDIF-Out
Ths S/PDIF (Sony & Phlps Dgtal Interconnect Format) connector s provded for dg-
tal audo transmsson to external speakers through an optcal fiber cable.
Mouse/Keyboard
The standard PS/2 ® mouse/keyboard DIN connector s for a PS/2 ® mouse/keyboard.
Clear CMOS Button
There s a CMOS RAM on board that has a power supply from external battery to keep
the system configuraton data. Wth the CMOS RAM, the system can automatcally
boot OS every tme t s turned on. If you want to clear the system configuraton, use
the button to clear data. Press the button to clear the data.
Important
Make sure that you power off the system before clearng CMOS data.
After pressng ths button to clear CMOS data n power off (G3) state, the system wll
boot automatcally.
IEEE 1394 Port
The IEEE 1394 port on the back panel provdes connecton to IEEE 1394 devces.
USB 2.0 Port
The USB 2.0 port s for attachng USB 2.0 devces such as keyboard, mouse, or other
USB 2.0-compatble devces.
USB 3.0 Port
USB 3.0 port s backward-compatble wth USB 2.0 devces. Supports data transfer rate
up to 5 Gbt/s (SuperSpeed).
Important
If you want to use a USB 3.0 devce, you must use the USB 3.0 cable to connect to the
USB 3.0 port.
▶
▶
▶
▶
▶
▶
eSATA Port
LAN DVI-I Port