MSI 880G-E45 - Manual (Page 51)

3-11
MS-7576
Chapter 3
VGA Share Memory
This setting controls the exact memory size shared to the VGA card.
UMA Location
This function is used to select the location of UMA to avoid overlaping with the other
data blocks in system memory.
SIDEPORT Memory Frequency (optional)
This item allows you to set the SIDEPORT memory frequency (in MHz).
UMA-SP Interleave Mode (optional)
This item allows you to adjust the ratio of UMA to SIDEPORT memory.
Boot Sequence
Press to enter the sub-menu and the following screen appears:
--- Boot Device
These items allow you to arrange the order that the BIOS uses to look for a boot
device from which to load the operating system during the boot process.
Boot From Other Device
Setting the option to [Yes] allows the system to try to boot from other device, if the
system fails to boot from above devices.
Trusted Computing
Press to enter the sub-menu and the following screen appears:
TCG/TPM SUPPORT
Setting the option to [Yes] enables TPM (Trusted Platform Module) to the system.
Exectue TPM Command
This item allows you to enable/ disable the Execute TPM Command feature.
Clearing the TPM
Press Enter to clear the TPM status.
TPM Enable/Disable Status, TPM Owner Status
These two items show the TPM status.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶