Chapter 3, Important – MSI B85M-E43 DASH User Manual
Page 72
Chapter 3
3-18
BIOS Setup
3-19
BIOS Setup
3-18
BIOS Setup
3-19
BIOS Setup
CPU Core Voltage [Auto]
Sets CPU Core voltage. If set to "Auto", BIOS will set these voltages automatically or
you can set it manually.
Current CPU Core Voltage
Show the current CPU Core voltage. Read-only.
DRAM Voltage [Auto]
Sets the memory voltage. If set to "Auto", BIOS will set memory voltage automatically
or you can set it manually.
Current DRAM Voltage
Shows current memory voltage. Read only.
CPU Memory Changed Detect [Enabled]
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled]
The system will issue a warning message during boot and than needs
to load the default settings for new devices.
[Disabled]
Disables this function and keeps the current BIOS settings.
Spread Spectrum
This function reduces the EMI (Electromagnetic Interference) generated by modulating
clock generator pulses.
[Enabled]
Enables the spread spectrum function to reduce the EMI
(Electromagnetic Interference) problem.
[Disabled]
Enhances the overclocking ability of CPU Base clock.
Important
If you do not have any EMI problem, leave the setting at [Disabled] for optimal
system stability and performance. But if you are plagued by EMI, select the value of
Spread Spectrum for EMI reduction.
The greater the Spread Spectrum value is, the greater the EMI is reduced, and
the system will become less stable. For the most suitable Spread Spectrum value,
please consult your local EMI regulation.
Remember to disable Spread Spectrum if you are overclocking because even a
slight jitter can introduce a temporary boost in clock speed which may just cause
your overclocked processor to lock up.
CPU Specifications
Press
installed CPU. You can also access this information menu at any time by pressing
[F4]. Read only.
CPU Technology Support
Press
does the installed CPU support. Read only.
▶
▶
▶
▶
▶
▶
•
•
•
▶
▶