KWorld UB385-T - Manual (Page 3)

3
1.3 Hardware Installation
Please follow the steps shown below for installation of your Tonino Lamborghini UB385-T and follow the
pictorial guide below for peripheral connections.
1. Please plug the special RF converter into the end of RF connector on Tonino Lamborghini UB385-T ,
and then plug either the DVB-T antenna or TV cable. If the signal isn’t good, Please re-plug RF
converter again.
2. Connect the Tonino Lamborghini UB385-T to your computer via any of the available USB 2.0
ports.1.3 Hardware Installation
(Note: Do not attach the device onto the USB on the keyboard or to a
USB hub; these won’t provide enough power for it.)
3.