FMI Q-CSC-W - Manual (Page 2)

GLAND INLET
WASTE
OR
PROCESS
OUT
DISCHARGE
IN
SUCTION
INERT GAS
WATER OR
SOLVENTS
RESERVOIR
1/8"
I.D.
TUBING
TYPICAL ISOLATION "W" GLAND PUMP HEAD SETUP
• GLAND FEED RATE - 2-5 mL/MIN
• PRESSURE FEED - GLAND INLET PRESSURE MUST BE LESS THAN
OR EQUAL TO THE MATERIAL BEING PUMPED
• GRAVITY FEED - FOR CONTINUOUS OPERATION WE SUGGEST INSTALLING
A LEVEL DEVICE SO THE GLAND DOES NOT RUN DRY.
Temperature Controlled Pump Heads CSC-WT
True Temperature Control of your FMI Pump Head up to 350ºF (180ºC)
For:
• Pharmaceutical
• Cosmetic
• Laboratory
• Process
• Food & Dairy
• Pilot Plant
• Industrial
• Reactor Feed
Figure 1
IN-Q-W&WT-10