EasyN F2 Series User manual - Manual (Page 18)

MF2E-E-A4
- 18 -
™ address. It can support 4 receivers.
5.8. MOTION DETECTION
Select motion detection to monitor a fixed area, it will trigger alarm
when there is abnormal situation. The configuration interface as picture
22，device can support 16 areas of motion detection，tick on option under
viewing window to enable the function of selected area. After enabling
the area，the screen will show a area frame and area number，click mouse
on the frame to drag to anywhere，also the frame size can be changed by
dragging the right-down corner of the frame. After configuration, click
apply button to enable the settings.
Picture 15- motion detection
™ Motion detection area: it can trigger email alarm and record linkage
after enabling motion detection, and support 16 different areas
™ Sensitivity: it supports to choose different sensitivities from 0 to 30, 30
is the highest.
™ Motion detection alarm: email alarm linkage, FTP upload picture, siren，
etc.
™ GPIO input alarm: support external alarm sensor，it can trigger alarm linkage
when alarming, such as email notice, FTP upload picture, etc.