EasyN F2 Series Quick Start - Manual (Page 9)

QF2E-E-A4 9
Figure 2.2
Pls make sure the Server IP Address,start port and end port be same with your
camera’s.
1）Enter IP Camera Finder to set the basic configuration,
2）Login the Camera homepage as Administration.
3）Enter DDNS Settings Page and enable DDNS service. Click and
the device will reboot
4）You can access the Camera from Internet by domain name( like:
http://demo.ipcam.hk )
Access the IP Camera from the Internet
User can access the IP Camera from the Internet, by enter WAN IP address +
port number in the IE to access different IP Cameras. For example,
Http://116.25.51.115:81
Conclusion
Other detail settings please consult user manual