WIKA 851 - Manual (Page 6)

GB
2435182.03 12/2010 GB/D/F/E
WIKA operating instructions electronic contact, model 830 E 6
The electronic contact has been designed and built solely for the intended use
described here, and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on operation
contrary to the intended use.
2.2 Personnel qualification
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to
equipment.
■ The activities described in these operating instructions may only
be carried out by skilled personnel who have the qualifications
described below.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their
technical training, knowledge of measurement and control technology and
on their experience and knowledge of country-specific regulations, current
standards and directives, are capable of carrying out the work described and
independently recognising potential hazards.
2.3 Special hazards
WARNING!
When installing, commissioning and operating these instruments,
observe the appropriate national safety regulations (e.g. VDE
0100).
WARNING!
Only work on the gauge with the voltage disconnected.
WARNING!
Residual media in dismounted instruments can result in a risk to
personnel, the environment and equipment.
Take sufficient precautionary measures.
2. Safety