WIKA 73 - Manual (Page 6)

GB
11591367.02 05/2012 GB/D/F/E
6 WIKA operating instructions models 73, 74 (ATEX)
2. Safety
WARNING!
Before installation, commissioning and operation, ensure
that the appropriate gas actuated thermometer has been
selected in terms of measuring range, design and specific
measuring conditions. The compatibility of the wetted
parts of the process connection (thermowell, thermowell
stem) with the medium must be tested.
Non-observance can result in serious injury and/or
damage to the equipment.
Further important safety instructions can be found in the
individual chapters of these operating instructions.
2.1 Intended use
These gas actuated thermometers are used for measuring
temperature in hazardous areas of industrial applications.
The instrument has been designed and built solely for the intended
use described here, and may only be used accordingly.
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the instrument
outside of its technical specifications requires the instrument to be
taken out of service immediately and inspected by an authorised
WIKA service engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
2. Safety