WIKA 32 - Manual (Page 6)

6
11603445.01 10/2010 GB/D/F/E
GB
WIKA operating instructions model 32
2.1 Intended use
The Model 32 machine glass thermometer is used for measuring the
temperature in plant or machinery.
The instrument has been designed and built solely for the intended
use described here, and may only be used accordingly.
The technical specifications contained in these operating instructions
must be observed. Improper handling or operation of the instrument
outside of its technical specifications requires the instrument to be
shut down immediately and inspected by an authorised WIKA service
engineer.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
2.2 Personnel qualification
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and
damage to equipment.
■ The activities described in these operating instructions
may only be carried out by skilled personnel who have
the qualifications described below.
■ Keep unqualified personnel away from hazardous areas.
Skilled personnel
Skilled personnel are understood to be personnel who, based on their
technical training, knowledge of measurement and control technology
and on their experience and knowledge of country-specific regulations,
current standards and directives, are capable of carrying out the work
described and independently recognising potential hazards.
2. Safety