WIKA UT-11 - Manual (Page 12)

GB
WIKA operating instructions unitrans  indicator module model A-IUR-1 12
14040124.01 04/2012 GB/D/F/E
6. Commissioning, operation
6.2 Illustration
Display mode
Tendency display
Error code
Display of additional
information
Bar graph display
Measured value display
Unit, row 1
Row 2
Row 3
Menu navigation
Setting mode
The measured value display has 4 digits and an additional sign.
Underneath, you will find row 1 for the error code and the unit of the
measurement signal. The unit can be selected by the user. Measured values
over 9999 cannot be correctly displayed, so care should be taken in the
selection of units (e.g. 9999 Pascal is the same as 0.09999 bar).
On rows 2 and 3 further additional information can be displayed.
In the setting mode, rows 1 ... 3 are used for the menu navigation, using plain
text.
The operation and setting of the instrument can be found in the
operating instructions for the Unitrans  process transmitter.