Kramer Electronics PT-571HDCP - Manual (Page 7)

Your PT-571HDCP / PT-572HDCP
5
5
4 Your PT-571HDCP / PT-572HDCP
This section describes the:
• PT-571HDCP DVI Line Transmitter, see section
4.1
• PT-572HDCP DVI Line Receiver, see section
4.2
4.1 Your PT-571HDCP DVI Line Transmitter
The PT-571HDCP DVI Line Transmitter receives a DVI signal, encodes it, and
transmits it over a CAT 5 cable to the PT-572HDCP. The PT-571HDCP has:
• A DVI input connector
• An RJ-45 CAT 5 output connector
• One power status LED
Figure 1 and Table 1 define the PT-571HDCP:
Figure 1: PT-571HDCP DVI Line Transmitter
Table 1: PT-571HDCP DVI Line Transmitter Features
# Feature Function
1 12V DC +12V DC connector for powering the unit
2 DVI IN Connector Connect to the DVI source
3 OUT RJ-45 Connector Connect to the IN RJ-45 connector on the PT-572HDCP
4 ON LED Lights red when receiving power only, orange when input and power are
attached, and yellow when both an active input and output are attached