Kramer Electronics 6808HDxl - Manual (Page 9)

6 6808HDxl - Connecting the 6808HDxl
4 Connecting the 6808HDxl
Always switch off the power to each device before connecting it to your
6808HDxl. After connecting your 6808HDxl, connect its power and
then switch on the power to each device.
To connect the 6808HDxl as illustrated in the example in Figure 3 :
1. Connect an SD/HD/3G HD-SDI source (such as an HD/SD digital video
player) to the HD/SD-SDI IN BNC connector.
2. Connect the HD/SD-SDI OUT BNC connector to an SDI acceptor (such as
an SDI display).
3. Connect the AES OUTPUT A BNC connector (for channel 1) to AES digital
audio acceptor 1 (such as DAT-Recorder 1).
4. Connect the AES OUTPUT B BNC connector (for channel 2) to AES digital
audio acceptor 2 (such as DAT-Recorder 2).
5. Set the GROUP SELECT DIP-switch ON for the group to de-embed (from 1
to 4). Figure 2 shows group 1 selected.
Note: Set one switch ON only. Set all other switches OFF.
6. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 3 ).
Figure 2: Group Select DIP-Switches
i