Kramer Electronics RC-54DL User Manual
Page 15
RC-54DL –
Front Panel Button Caps and Labels
13
5. Repeat for all caps (all horizontally oriented except for the top left button).
6. Remove the protective foils from both sides of the Perspex (acrylic glass)
windows.
7. Place the faceplate on the
RC-54DL so that the four screw mounting holes
are aligned.
8. Insert the four mounting screws and tighten with a screwdriver.
9. Install the volume control knob.
See also other documents in the category Kramer Electronics Control panel:
- RC-76R (137 pages)
- SL-14RC (27 pages)
- SL-12 (8 pages)
- SL-12 (18 pages)
- RC-IR2 (24 pages)
- RC-8000 (37 pages)
- RC-160 (35 pages)
- EDID Designer (33 pages)
- FC-21ETH (47 pages)
- FC-29 (13 pages)
- K-Touch (18 pages)
- K-Touch (9 pages)
- PL-15 (9 pages)
- PL-18 (25 pages)
- PL-50 (9 pages)
- PL-50 (52 pages)
- PL-8 (23 pages)
- PT-4iREX (2 pages)
- PT-4iREX (13 pages)
- RB-6 (38 pages)
- RB-8 (11 pages)
- RC-108 (34 pages)
- RC-43T (20 pages)
- RC-53D (15 pages)
- RC-53DLC (18 pages)
- RC-712M (25 pages)
- SL-10 (17 pages)
- RC-76R (23 pages)
- SL-1 (12 pages)
- RC-8RK (54 pages)
- RC-8RK (19 pages)
- Site-CTRL™ (28 pages)
- VP-14xl (14 pages)