Kramer Electronics VP-729 - Manual (Page 42)

VP-729 - Using Text Overlay 37
37
Feature Function
Parameter Setting Area
Text Color Dropdown
Box
Select the Text color
Background Color
Dropdown Box
Set the text background color
Transparency Dropdown
Box
Select On for a transparent background or Off for a non-
transparent background
Display Height Check
Box
Set the thickness of the background stripe (72 or 36)
Text Position – V-
Position
Set the vertical position of the text background on the display
screen (Top, Center or Bottom)
Communication Interface Area
Connect/Disconnect Connect the machine or disconnect
TCP/IP Check box
When selected, set the IP Address (or search the IP
Address) and Port to connect via Ethernet (you have to
select the connection type before connecting the software to
the machine)
RS-232 Check box
When selected, set the COM port and Baud Rate (9600) to
connect via the RS-232 connector
Scrolling Mode Area
Blank Time (Sec)
Dropdown Box
Set the blank delay time (from 1 to 5)
Speed Dropdown Box
Set the speed at which the text moves on the display (from 1
to 5)
Mode
Set to Still (fixed text) or Scrolling (text moves across the
display)
Send Text Area
Message Type the desired text in the Message box
Repeat Dropdown Box
Set the number of times that the text message will scroll
across the screen (1 to 20), or set to Forever to repeat the
text message continuously
For example, set to 2 to repeat the text twice
H-Offset Dropdown Box
After selecting the Static mode, use the H-Offset box to
select the horizontal position of the text (Left Center or Right)
Start Button Click to display the text on screen
Stop Button Click to stop scrolling on screen
Quit Button Click to quit the program
Load Setting Button Click to load a previously saved setting
Save Setting Button Click to save the current setting