Kramer Electronics TP-305A - Manual (Page 5)

Overview
3
3 Overview
The TP-305A UXGA - Audio - RS-232 Line Receiver/DA receives a CAT 5
signal from a transmitter
1
and distributes it to up to five other receivers (via
CAT 5 cables). The TP-305A also decodes the CAT 5 signal and distributes
it to a UXGA output, an analog audio output, a digital audio output and an
RS-232 output.
The TP-305A serves as a power center that can distribute power to both the
transmitter and the connected receivers (see section
3.1 ).
In particular, the TP-305A features:
• Resolution of up to UXGA
• UXGA output on a 15-pin HD computer graphics video connector
• Digital audio output (S/PDIF) on an RCA connector and an analog
audio output on a 3.5mm mini jack
• A transmission range of up to 300ft (up to 100 meters) over STP
cabling
• Changeable polarity of the encoded H and V Sync for video (UXGA)
• EQ. and LEVEL controls for the video (UXGA) output
To achieve the best performance:
• Use only good quality connection cables 2
to avoid interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables).
• Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer TP-305A
away from moisture, excessive sunlight and dust
1 For example, the Kramer TP-121, TP-123 or TP-45
2 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com