Kramer Electronics VP-103 - Manual (Page 6)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting your VP-103 XGA Line Amp/Converter
4
5 Connecting your VP-103 XGA Line Amp/Converter
Connect 1 your VP-103 XGA Line Amp/Converter, as the example in Figure 2
illustrates:
1. Connect a computer graphics source to the INPUT HD15F connector.
2. Connect a local display to the ACTIVE LOOP HD15F connector.
3. Connect the RGBHV OUT 1 BNC connectors to an RGBHV display.
4. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in this illustration).
RGBHV Display 1 Computer
Graphics Source
Local
Display
Figure 2: Connecting the VP-103 XGA Line Amp/Converter
1 Switch OFF the power on each device before connecting it to your VP-103. After connecting your VP-103, switch on its
power and then switch on the power on each device