Kramer Electronics VP-103 - Manual (Page 4)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
3 Overview
The Kramer VP-103 XGA Line Amp/Converter is a high performance line
amplifier and format converter for computer graphics video signals (up to at
least UXGA). It accepts a computer graphics video input on a 15-pin HD
connector, and converts it to two identical outputs of either RGBS, RGsB, or
RGBHV.
In addition, the
VP-103:
Provides the local monitor loop-through, and necessary buffering,
amplification, and sync processing for remote acceptor applications
Is HDTV compatible
Has a video bandwidth of 315MHz to ensure transparent operation at
multiple resolutions including XGA
Includes selectable output sync pushbuttons
Includes a front-panel termination pushbutton
1
Includes front panel Level and Cable EQ. controls
The VP-103 is rugged, dependable, and runs on a standard 12VDC source.
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position
your Kramer VP-103 away from moisture, excessive sunlight and dust
1 For applications not requiring a local monitor, thus eliminating the need for external termination plugs