Kramer Electronics VM-4HN - Manual (Page 8)

VM-4HN - Overview 5
3.1 Defining the VM-4HN 1:4 HDMI DA
Figure 1 defines the VM-4HN.
Figure 1: VM-4HN 1:4 HDMI DA
# Feature Function
1 HDMI IN Connector Connects to the HDMI source
2 EDID SETUP Button Press to capture the input EDID or select the default EDID
(see
Section ‎4.1 )
3 IN LED Lights when an active input signal is detected
4 OUT 1-4 LEDS Lights when an active output acceptor is detected
5 ON LED Lights when the device is powered on
6 HDMI OUT 1-4
Connectors Connect to up to 4 HDMI acceptors
7 5V DC Connector Connects to the 5V DC power supply