Kramer Electronics VM-400HDCP - Manual (Page 10)

VM-400HDCP - Connecting the VM-400HDCP 7
7
5 Connecting the VM-400HDCP
Always switch off the power to any device before connecting it to your
VM-400HDCP. After connecting your VM-400HDCP, connect its power
and then switch on the power to the other devices.
Figure 3: Connecting the VM-400HDCP 1:4 DVI Distributor
To connect the VM-400HDCP as illustrated in the example in Figure 3 :
1. Connect the DVI source (for example, a DVD player) to the DVI Input
connector on the front panel.
2. Connect the DVI outputs and loop monitor to up to four DVI acceptors (for
example, an LCD TV and a plasma display).
3. Connect the power adapter to the VM-400HDCP and to the mains electricity
(not shown in Figure 3 ).
i