2 connecting the vm-22hd in the dual link mode, Connecting the vm-22hd in the dual link mode, Figure 3: connecting the vm-22hd in dual link mode – Kramer Electronics VM-22HD User Manual
Page 8

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VM-22HD 2 x 1:2 HD/SD-SDI DA
6
5.2
Connecting the VM-22HD in the Dual Link Mode
To connect the VM-22HD, as the example in
illustrates, do the
following
1. Connect one HD-SDI/SD-SDI video source (for example, a dual-link
camera) to the INPUT A and B BNC connectors.
2. Connect OUTPUT A 1 and B 1 BNC connectors to a dual link
HD-SDI/SD-SDI video acceptor (for example, display A).
3. Connect OUTPUT A 2 and B 2 BNC connectors to a dual link
HD-SDI/SD-SDI video acceptor (for example, display B).
4. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
).
The VM-22HD operates as soon as it is connected and powered on.
Figure 3: Connecting the VM-22HD in Dual Link Mode
1 Switch OFF the power on each device before connecting it to your VM-22HD. After connecting your VM-22HD, switch on
its power and then switch on the power on each device